Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 43k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 43k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
Kit Includes Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, Furnace Leveler, PVC Ptrap Kit, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 43k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 11.7 EER2, 7.8 HSPF2
- Heating Input (BTUH):
- 080 MBH Heat
- Includes:
- H4H5S36AKAAA, F96VTN0802120A, EAM4X43L21A, HPKIT5
- Nominal Capacity (BTUH):
- 36000
- Cooling Efficiency (EER2):
- 12
- Cooling Efficiency (SEER2):
- 15.2
- Heating Efficiency HSPF2:
- 7.8 HSPF2
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Multi Position "A" Coil
- Furnace Efficiency:
- 96
- System Nominal Tons:
- 3.0 Ton
- AHRI System Number:
- 210316473
Heat Pump, Single Phase, Split Gas Furnace Single Stage, Multi Position "A" Coil H4H5S/F96VTN/EAM4X
Heat Pump
Heat Pump
- Scroll Compressors on all models
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Bi Flow Filter Drier Supplied for Field Installation
- Suction Line Accumulator Standard
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Reliable Time / Temperature Defrost Control
- Internal Pressure Relief Valve & Internal Thermal Overload
Gas Furnace
- Two-stage heating operation
- Two-speed induced draft combustion blower
- Supports single- and two-stage cooling units
- Dehumidification feature (A/C)
- Fully insulated steel cabinet
- Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
- VCT Variable Speed Constant Torque Motor
- Aluminized steel RPJ primary heat exchanger
- Stainless steel secondary heat exchanger
- Direct ignition with Silicon Nitride ignitor
- Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
- 35” (889mm) high , for ease of installation
- Four position - upflow/downflow/horizontal (left/right) installation
- At least twelve different venting configurations
- Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
- Self-configuring and communicating control
- Concentric vent available
- Twining Capable (select size) w/ kit
Evaporator Coil
- Thermostatic Expansion Valve (TXV)
- Multi-position airflow design
- Sturdy galvanized steel cabinet
- Non-ozone-depleting R-410A refrigerant
- Capacity: 1.5 - 5 tons
- Cased A coil design for efficient heat transfer in a compact size
- Corrosion-resistant all-aluminum coil
- Fully insulated cabinet
- Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup